One perk of getting your home security system installed professionally is that you rarely have to make major adjustments to it. However, there could be a couple situations when you must reset your alarms in Las Vegas. If you’re utilizing a smart command interface, resetting normally needs only one or two tap of a button following occurrences like battery changes, power outages, and false alarms.
Check Your Manual Before Trying to Reset Your Alarm Panel
One note of caution before you begin to reset your Las Vegas home security system, consult your manual prior to proceeding. You don't want to damage your property’s defense as a result of touching a button in error. Also, the process could change if you moved from a number pad to a digital command hub. And if you can't reset your system, don't be reluctant to call the experts.
Resetting Your Las Vegas Home Security System After A False Alarm
Usually, a false alarm happens because of the accidental tripping of a sensor. You are able to engage the control panel or access your ADT smartphone app and tap the shield image and type in your security code to switch off the alarms in these situations. You could receive notification from your security monitoring team, but simply inform them that you experienced a false alarm.
Tips To Reset Your Alarm Following A Power Outage In Las Vegas
If power is lost from lighting, strong winds, or other reasons, you may begin hearing a repeated, high-pitched beep from your central command hub. This signifies that the alarm is being powered by the secondary power source. To reset your unit and halt the beeping, you must deactivate and reactivate your system.
But please note, if power is out for prolonged time frame, you could need a complete reset of your home’s security. Pay careful attention to the directives in the manual -- usually by entering your unique passcode and tapping the designated button twice -- and you should be back in business. You may keep hearing the auxiliary power beeping, as it may not end until the battery charges entirely. Contact your security technician if you are still having issues with your ADT system at least 20 hours after the power is resumed.
Reset Your Home Security System After Switching Out A Battery
There will be infrequent times when you need to change a battery powering one of your security devices. When this needs to be done, you will set your home’s defense to test mode so you don't trigger an accidental alarm. Once the new battery is put in place, move the alarm out of "Test Mode" and restore normal operations. If the control panel is unable to notice the device or the battery icon is still on, you may require a full reset of your security system.
Tips to Reset Your Las Vegas Security System Following The Addition Or Deletion Of A Code
Removing or adding users can be accomplished on the ADT Command panel and the ADT Control mobile app. You shouldn't require a system reset following the addition or deletion of users. However, if you find yourself moving to a new home with an existing ADT alarm system, you need to call your security specialists at (702) 446-1220 to set up a new service. The installer will go on site to switch out components, place other alarms or cameras (as required), and reset the system for you.
A User-Friendly Security System Is The Right Choice
Resetting a home security system in Las Vegas can be frustrating if it isn’t equipped with clear instructions and features. If you’re ready to acquire your functional and powerful home security system, call (702) 446-1220 or send in the form below. Our specialists are pleased to customize the right security system for your residence.