Categories

System malfunctions and false alarms can be aggravating, and even more concerning, may prevent your home security system from working the way it should. Thankfully, most troubles, from dead batteries to false alarms, are easy to fix. Check out our suggestions for troubleshooting your home alarm system in Las Vegas. We’ll help you keep your family safe and your system operating smoothly.

Test Your Home Security System In Las Vegas

One effective way to troubleshoot your home’s security is to test it! Newer systems permit you to place them in test mode to avoid triggering an emergency response. After switching to test mode, do the following:

• Arm your system as you would when leaving.
• Open a door or window that has a contact sensor, or test other equipment. Shut the window or door once you’re done so it doesn’t prompt the alarm as you leave test mode.
• Permit the alarm to resonate for 60 seconds to ensure communications with the security provider and to create an entry in the alarm system log.
• Proceed to test sensors as you wish
• Inspect the systems’s activity log to verify functionality.

Rest assured, monitoring agents will know that your alarm system is being tested. Just be sure to switch off test mode when complete. It’s a good idea to test once a month or whenever you adjust your home’s phone or internet provider.

Evaluate The Positioning And State Of Motion Detectors

Although an crucial element of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Perform a physical check. Are there objects that could move within the sensor’s detection range, like a window treatment blown in a breeze?
• Is the sensor dirty? Grime, dirt, and cobwebs can cause poor performance. Check to confirm the sensor is clean.
• Does the motion detector have pet immunity you can enable? Some can be set to ignore pets weighing up to 100 pounds.
• When was the battery replaced? A nearly depleted battery might affect performance or lead to false alarms.
• Is a heat source impairing the sensor? Excessive heat from sunlight or a fireplace can trigger an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One helpful aspect of modern home security systems is that they’ll notify you when batteries are running low. If your system has a smartphone app or control panel, you’ll usually find alerts there. Depending on the alarm, you may hear an occasional beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that need to be replaced every so often. It’s wise to keep batteries on hand and create a replacement schedule. Top systems also include a rechargeable backup battery for the primary control panel. This battery helps keep your system operating if you have a power outage and should recharge itself once power is back online. If it fails to recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Las Vegas 

As the top name in home security, ADT creates systems that provide superior protection and functionality. Accessing test mode is easy through the ADT+ app or MyADT.com, and you’ll always be sent notifications when a sensor battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Las Vegas home. Place a call to (702) 446-1220 or submit our form today!